X-MEDIA PCI 1-Port 10/100Mbps Fast Ethernet Network Adapter

• Fully complies with  802.3 and 802.3u standards
• Support Full Duplex Flow Control (IEEE 802.3x)
• Support 10/100Mbps NWay Auto Negotiation
• Support ACPI, PCI power management
• 32-bit PCI local Bus master architecture
• Plug and play installation
• LED indicator for monitoring Link/Act

• Hardware Features:
  • Standards & Protocols:
    • IEEE 802.3, 802.3u, 802.3x
    • CSMA/CD, TCP/IP, PCI Revision 2.1/2.2
  • Chipset: Realtek 8139D
  • Interface:
    • 32-bit PCI
    • 1 * 10/100Mbps RJ-45 port
  • Network Media:
    • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
    • EIA/TIA-568 100Ω STP (maximum 100m)
    • 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
    • EIA/TIA-568 100Ω STP (maximum 100m)
  • Flow Control: IEEE 802.3x Flow Control (Full-Duplex)
  • Transmission Rate:
    • 10/100Mbps for Half-Duplex mode
    • 20/200Mbps for Full-Duplex mode
  • LED Indicator: Link/Act

  Others:

  • Environmental:
    • Operating Temperature: 0°C – 40°C (32°F – 104°F)
    • Storage Temperature: -40°C – 70°C
    • Operating Humidity: 10% – 90% Non-condensing
    • Storage Humidity: 5% – 90% Non-condensing
  • System Requirement:    Win98SE/Me/NT/2000/XP/Vista/7/8/Linux/Novell Netware
  • Certification:  FCC, CE

There are no drivers available for this product at this time. Check back in the future for updated drivers and firmware.

There are no documents available for this product at this time. Check back in the future for updated documents.