Features
- Fully complies with 802.3 and 802.3u standards
- Support Full Duplex Flow Control (IEEE 802.3x)
- Support 10/100Mbps NWay Auto Negotiation
- Support ACPI, PCI power management
- 32-bit PCI local Bus master architecture
- Plug and play installation
- LED indicator for monitoring Link/Act
Specifications
- Hardware Features:
- Standards & Protocols:
- IEEE 802.3, 802.3u, 802.3x
- CSMA/CD, TCP/IP, PCI Revision 2.1/2.2
- Chipset: Realtek 8139D
- Interface:
- 32-bit PCI
- 1 * 10/100Mbps RJ-45 port
- Network Media:
- 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
- EIA/TIA-568 100Ω STP (maximum 100m)
- 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
- EIA/TIA-568 100Ω STP (maximum 100m)
- Flow Control: IEEE 802.3x Flow Control (Full-Duplex)
- Transmission Rate:
- 10/100Mbps for Half-Duplex mode
- 20/200Mbps for Full-Duplex mode
- LED Indicator: Link/Act
Others:
- Environmental:
- Operating Temperature: 0°C – 40°C (32°F – 104°F)
- Storage Temperature: -40°C – 70°C
- Operating Humidity: 10% – 90% Non-condensing
- Storage Humidity: 5% – 90% Non-condensing
- System Requirement: Win98SE/Me/NT/2000/XP/Vista/7/8/Linux/Novell Netware
- Certification: FCC, CE
- Standards & Protocols:
Downloads
| Drivers |
|
There are no drivers available for this product at this time. Check back in the future for updated drivers and firmware.
| Documents |
|
There are no documents available for this product at this time. Check back in the future for updated documents.
