Features
- Fully complies with 3, 802.3u, 802.3ab standards
- Support 802.1p, 801.1q VLAN
- Support Full-Duplex Flow Control (IEEE 802.3x)
- Support 10/100/1000Mbps NWAY Auto Negotiation
- Wake-on-LAN and remote wake-up support
- Crossover Detection & Auto-Correction
- LED indicator for monitoring Link/Act
- Plug and Play, No Driver Installation required
Specifications
| Standard: | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p |
| Interface: | USB 3.0 Type A |
| 1 * 10/100/1000Mbps RJ-45 port | |
| Chipset: | Realtek RTL8153 |
| Data Transfer Rate: | 10/100/1000Mbps for Half-Duplex mode |
| 20/200/1000Mbps for Full-Duplex mode | |
| Network Media: | 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) |
| EIA/TIA-568 100Ω STP (maximum 100m) | |
| 100Base-TX: UTP category 5, 5e cable (maximum 100m) | |
| EIA/TIA-568 100Ω STP (maximum 100m) | |
| 1000Base-T: UTP category 5e, 6 cable (maximum 100m) | |
| Flow Control: | IEEE 802.3x Flow Control (Full-Duplex) |
| LEDs: | Link/Act |
| Operating Temperature: | 0°C ~ 40°C (32°F ~ 104°F) |
| Storage Temperature: | -40°C ~ 70°C |
| Operating Humidity: | 10% ~ 90% Non-condensing |
| Storage Humidity: | 5% ~ 90% Non-condensing |
| System Requirement: | Windows 2000/XP/Vista/7/8.x/10; Linux |
| Certification: | FCC, CE |
Downloads
| Drivers |
|
There are no drivers available for this product at this time. Check back in the future for updated drivers and firmware.
| Documents |
|
There are no documents available for this product at this time. Check back in the future for updated documents.
